Oneida Victor® Conibear® Traps

For more than 40 years Conibear Traps have been the favorites of trappers and wildlife managers wherever bodygrip traps are desired.  Light-weight and compact, Oneida Victor's Conibear and Northwoods Conibear Traps are designed for use in a wide variety of predator control, fur trapping, and wildlife management applications.  When used properly, they result in a quick, humane kill.

Conibear traps are widely used by wildlife managers and trappers throughout the United States.  Their experience proves that these traps work equally well on the ground, suspended, submerged in water, under ice, or when covered with light snow.  They should NOT, however, be used where non-target animals are at risk for capture.

Recent refinements have made these traps even more effective and easier to use.  Newer versions of Conibear Traps are indicated by "-2" after the trap number.

Every Conibear Trap (except the #110) has a 4-way trigger that fires the trap when an animal pushes the trigger from any direction, including the side.

Novice trappers should ALWAYS complete a trapper education course given by the appropriate State and/or trapper organization prior to trapping.

Special Order Sizes

--------------------------------

Conibear® Trap Types and Styles at a Glance

 

Northwoods® Body Grip Traps

150	0150	mink, muskrat, opossum, raccoon, skunk	00150 5	5 x 5	12	13 lbs.	0.32
155	0155	fisher, marten, mink, nutria, opossum, raccoon, skunk	00155 0	5 x 5	12	17 lbs.	0.48

 

Northwoods Conibear Trap click here to view promotional flyer

* Traps certified under the Agreement of International Humane Trapping Standards or A.H.I.T.S.

Click here to view the International Compliance Certificates of Humane Standards for all Oneida Victor products

--------------------------------------------

Oneida Victor® Northwoods® Conibear® Wildlife Trap Setting Instructions

#110 & #110-2 Conibear Wildlife Traps	----------------- Extend spring so it is pointed directly away from the trap.  Then grip and compress the spring.
	Keeping spring compressed, pull trap frames together with other hand.  If a Conibear Safety Gripper is available, set it over the jaws to hold them in place.
	Position trigger and dog at desired location along frame and then set trigger in preferred notch of dog.
	Be sure trigger is secure within notch of dog.  Then grip compressed spring and release frames slowly.  Release the Conibear Safety Gripper if one is being used.  Trap is now ready for use.  Spring can be swung to side if necessary for desirable setting position.

------------------------------------------

#120-2,  #126-2 & #160-2 Conibear Wildlife Traps
	------------------------ Extend both springs so they point directly away from trap.  Grip and compress either spring.  Set safety hook to keep spring compressed.  Repeat for second spring
	Center springs over hinge and pull frames together with one hand.  Keep them together with a Conibear Safety Gripper if one is available.
	Position trigger and dog at desired location along frame and then set trigger in preferred notch of dog.
	Be sure trigger is secure within notch of dog.  Place trap in desired location.  Then, keeping hands clear of trap frames, slowly release each safety hook and slide to coiled ends of spring.  Release Conibear Safety Gripper if one is being used.  Trap is now ready fo use.

 

#220-2,  #280-2 & #330-2 Conibear Wildlife Traps
	------------------------ Extend both springs so they point directly away from trap.  Hook notched ends of Oneida Victor #0965 trap setting tool over the eyes of either spring and compress.  Set safety hook to keep spring compressed.  Repeat for second spring.  Then proceed as for #120-2 & #160-2 Conibear wildlife traps.
	If a trap tool is not available, an 8 foot section of 1/4 inch rope can be used as shown.  Tie a loop in one end of the rope and thread the other end through the spring eyes.
	Place foot through the loop and pull the other end of the rope to compress springs.  Then proceed as for #120-2 & #160-2 Conibear wildlife traps.

Accessories to Help You Set Conibear Traps

	Trap Setting Tool This handy 20" tool lets you apply strong leverage to compress the springs on Conobear and long-spring traps of all sizes.  This tool is a good time-saver.
	Conibear Safety Gripper This safety gripper lets you make Conobear sets easily and safely, even difficult underwater sets.  If the trap is inadvertantly triggered, the Conibear Safety Gripper grabs and holds the jaws.

----------------------------------

Oneida Victor® Northwoods® Conibear® Wildlife Trap Parts

Wildlife Management Devices by Oneida Victor® including:  Conibear® Traps, Soft Catch® Traps, Northwoods® Traps, Newhouse® Traps.  Made in the USA since 1852